Cooling Magnetic Wireless Car Charger

Wireless charging generates heat. Heat makes the phone throttle. A throttled phone charges slower — which is why so many magnetic car chargers feel disappointing on a long drive with navigation running. This one attacks the problem directly.

Two-stage active cooling

A semiconductor cooling chip draws heat off the charging surface, and a built-in fan carries it away. The charger runs as a phone cooler and a charger at the same time, which keeps the phone out of the thermal-throttling range where charging speed collapses.

The difference shows up where it matters most: long drives, summer traffic, navigation and music running together, and phones sitting in direct sun on the windscreen side of the cabin.

RGB indicator light

The LED ring lights when wireless charging begins, so you can confirm at a glance that the phone actually seated on the coil instead of just sticking to the magnet. It doubles as ambient light at night.

360° ball joint, one-handed

Bring the phone close and the magnets pull it into alignment on the coil by themselves. The full ball joint switches between portrait for navigation and landscape for video in one movement.

Fits horizontal and vertical vents

The upgraded clip is designed for both horizontal and vertical vent slats, which covers most cabin layouts.

Charging speeds

Up to 15W, with 10W, 7.5W and 5W standard wireless charging also supported. Rated charging efficiency 85%.

⚠️ You need a QC3.0 car charger

The charger and the cooling system both draw from the USB-C input, so the power source matters even more here than on a plain wireless mount.

• Use a QC3.0 (or better) car charger on the USB-C input
• A car's built-in USB socket or an old 5V adapter will not supply enough for full-speed charging and active cooling together
• Do not skip this — it is the single most common reason these chargers underperform

Magnetic compatibility

What's in the box

• 1 × Cooling wireless car charger
• 1 × Air vent holder
• 1 × USB-C charging cable
• 1 × Magnetic ring

Specifications